Each device has its own commands and properties. There is no single table. The name you pass to device_add is the device type. Commands and properties are the ones that device publishes.
Home›All functions›Device
Simulation Instrument Studio 1
Simulation Instrument Studio 1
device_add(type, offset)Get a device reference (RealSimGear, Vortex, etc.).
| Name | Description |
|---|---|
type | Value type: FLOAT, INT, DOUBLE, or an array type such as FLOAT[8]. |
offset | Array index to start at. 0 is the first element. |
No sample instrument calls this yet.
device_add("FLOAT", offset)
Simulation Instrument Studio 1
device_prop_set(prop_name, value)Set a device property (e.g. display brightness).
| Name | Description |
|---|---|
prop_name | Property or object name. |
value | The value to write. |
No sample instrument calls this yet.
device_prop_set(prop_name, value)
Simulation Instrument Studio 1
device_prop_subscribe(prop_name, callback)Subscribe to a device property.
| Name | Description |
|---|---|
prop_name | Property or object name. |
callback | Function called when the value changes. |
No sample instrument calls this yet.
device_prop_subscribe(prop_name, function() end)
Simulation Instrument Studio 1
device_command(command_name)Send a command to the device.
| Name | Description |
|---|---|
command_name | Simulator command name. |
No sample instrument calls this yet.
device_command("...")
Simulation Instrument Studio 1
device_command_subscribe(command_name, value)Subscribe to a device command.
| Name | Description |
|---|---|
command_name | Simulator command name. |
value | The value to write. |
No sample instrument calls this yet.
device_command_subscribe("...", value)
Simulation Instrument Studio 1
connected = device_connected()Check if associated device is connected.
No sample instrument calls this yet.
device_connected()